Lalizas Automatic Bilge Pump 1000GPH 24V with Integrated Float Switch

Overview

Automatic 24V submersible bilge pump with an integrated water-level switch.

The all-in-one unit starts as bilge water rises and stops after drainage, reducing the need for a separate external float switch. A manual test control and removable snap-on strainer simplify routine inspection and maintenance.

Technical specifications

Applications and compatibility

For 24V bilge systems on motor cruisers, sailing yachts, workboats, fishing boats and other craft using a 25mm discharge hose.

• This is a 24V unit and must not be connected directly to a 12V supply.
• Actual flow falls as vertical lift, hose length, bends and restrictions increase.
• The float area must have enough clearance to move freely and remain accessible for cleaning.
• The pump supplements good bilge design and inspection; it is not a damage-control pump for major flooding.

Installation and package contents

• Mount the strainer base at the lowest practical bilge point on a level, secure surface.
• Route the discharge hose continuously upward to a correctly positioned through-hull and avoid low loops or kinks.
• Use marine-grade tinned wiring, watertight connections and circuit protection sized for the installation.
• Keep permanent automatic power available where required and test both pumping and switching functions regularly.
• Package contains: one automatic bilge pump with integrated float switch and snap-on strainer base.

Frequently asked questions

Does it require a separate float switch?

No. The automatic water-level switch is integrated into the pump.

Can it be used on a 12V boat?

No. This version requires a 24V DC electrical supply.

What discharge hose is required?

Use a 25mm / 1in marine hose with a secure, leak-free connection.

Is 1000GPH guaranteed in the installed boat?

No. The rating is nominal at low head; lift, hose length, bends and restrictions reduce real output.